Garage e gavoni - w-factor - camper

Garage and lockers

Heated lockers and garages

The rational use of space is always one of the primary objectives in the design of our compact motorhomes, both inside and outside the cabin.

THE external lockers they are important for the stowage of all camping equipment, to have everything in its place and within reach.
We have always used every square centimeter available under the floor, in the space between the underbody and the chassis side members. For each single model we have designed spacious lockers, accessible through the large external doors.

X-trafit garage

The Garage X-Trafit System project is  highly performing, resistant, waterproof, easy to clean to accompany the most extreme passions. At the same time it is well insulated and heated for the comfort of those who sleep in the sleeping area in the queue.
We therefore designed one monobloc capsule in fiberglass, which completely covers the floor and internal walls of the garage. In the cavity, a hot air tube heats the entire garage area, even on the wall. The internal capsule, one-piece in fiberglass, significantly improves the overall degree of internal finish of the garage compartment.

HIDDEN HINGES

With the dual objective of avoiding thermal bridges and obtaining a cleaner and more streamlined external line in addition to the “flat-shape fiberglass door and hatches, Wingamm adopts special concealed THIRD patented hinges.

A zipper solid, resistant, in Zamak alloy, which works completely hidden inside the door on one side and the body on the other.
There zamak is a non-ferrous alloy characterized by high hardness and resistance. The Third hinge is composed of a central body, levers, pins and fixing screws all made of Zamak. The slots, which allow the fixing of the hinge, are housed in the special “rotating bushings”, whose 360 ° rotation allows ample registration margins. Each hinge is housed inside a protective shell made of cast aluminum. The shells are positioned, by means of a mold, in the foreseen points of the bodywork and subsequently resinated to form a single body with the bodywork.

Mappa dei Gavoni Esterni

W-factors


Monoscocca in vetroresina - w-factor - camper

Monocoque in fiberglass

a unique shield, without equal

The fiberglass monocoque body is made with a sandwich system: fiberglass sheet + polyurethane foam insulation panel + fiberglass sheet. Inside the self-supporting structure, there are no wooden parts (which can decompose) or metal parts (which would act as a thermal bridge).

100% WATERPROOF
100% MONOBLOCK
100% WITHOUT WOODEN PANELS
100% WITHOUT METAL PARTS
100% WITHOUT THERMAL BRIDGES
100% WITHOUT CORROSION

Why in fiberglass?

Fiberglass is an extremely resistant, elastic and light material. This great elasticity eliminates the risk of hail damage and confers rigidity, protection while driving and durability over time to the entire living cell.

Furthermore, unlike metal, fiberglass is not a thermal conductor. A body made of metal or that contains metal parts cannot retain heat inside, it is naturally conducted to the cooler outside - consequently it cannot guarantee good internal thermal comfort. The fiberglass monocoque, on the other hand, is a sandwich structure made exclusively of fiberglass and polyurethane foam. Once the inside of the fiberglass monocoque is heated there is no dispersion / exchange of heat from the inside to the outside - the heat remains inside.

The thermal comfort is unmatched and the savings in terms of consumption are evident

DOOR, lockers AND DOORS IN FIBERGLASS sandwich and pu

To improve thermal comfort, exclude infiltration problems and improve aesthetics (avoid external frames, visible hinges and silicones) since 2009 we have introduced doors and doors in solid and light, "flat-shape" fiberglass without external frames, without hinges visible and without the need for external silicone.

We have also replaced all the external door handles, adopted a solid Fiat lock handle for the entrance door and designed an innovative and unique central locking system in the sector.

Patented concealed hinges

With the dual objective of avoiding thermal bridges and obtaining a cleaner and more streamlined external line in addition to the “flat-shape fiberglass door and hatches, Wingamm adopts special concealed THIRD patented hinges.

A zipper solid, resistant, in Zamak alloy, which works completely hidden inside the door on one side and the body on the other.

There zamak is a non-ferrous alloy characterized by high hardness and resistance. The Third hinge is composed of a central body, levers, pins and fixing screws all made of Zamak. The slots, which allow the fixing of the hinge, are housed in the special “rotating bushings”, whose 360 ° rotation allows ample registration margins. Each hinge is housed inside a protective shell made of cast aluminum. The shells are positioned, by means of a mold, in the foreseen points of the bodywork and subsequently resinated to form a single body with the bodywork.

Gallery

W-factors


pavimento-riscaldato-camper

Underfloor heating

a perfectly insulated and heated floor

Starting from the excellent degree of thermal insulation guaranteed by our bodywork (monocoque double shell in fiberglass, insulated with polyurethane foam), we have further improved comfort by offering a revolutionary underfloor heating system, additional to the standard heating system.

This system, integrating with traditional heating, allows more heating efficiency, lower consumption and unrivaled comfort in cold seasons.

How does it work?

The floor is made with a sandwich system for a total thickness of 50 mm.
In the floor we have created a ducting (also in fiberglass) inside which the hot air from the heating system (from the Truma Combi or the Webasto) is sent. On the upper surface of the floor we have laminated a very thin perforated aluminum plate in such a way as to distribute the heat evenly throughout the passenger compartment.

The floor is firmly glued along the entire perimeter to the internal walls of the monocoque by means of a special fiberglass lamination.

The sandwich floor further strengthens the entire vehicle structure giving greater stability to the entire bodywork and ensuring high torsion rigidity.

How does it work?

The floor is made with a sandwich system for a total thickness of 50 mm.
In the floor we have created a ducting (also in fiberglass) inside which the hot air from the heating system (from the Truma Combi or the Webasto) is sent. On the upper surface of the floor we have laminated a very thin perforated aluminum plate in such a way as to distribute the heat evenly throughout the passenger compartment.

The floor is firmly glued along the entire perimeter to the internal walls of the monocoque by means of a special fiberglass lamination.

The sandwich floor further strengthens the entire vehicle structure giving greater stability to the entire bodywork and ensuring high torsion rigidity.

W-factors


Letto basculante - w-factor - camper

Drop-down bed

a comfortable and functional foldaway double bed

Since 1977, wanting to create compact and manageable vehicles, we have studied and designed a drop-down bed which, disappearing into the ceiling, does not occupy living space in the day position.

We therefore patented the first and original longitudinal folding bed more than 40 years ago, which today has spread on the market. Our unparalleled experience has allowed us to make it sturdy, light and reliable, eliminating the risk of accidental opening and annoying creaking and allowing it to be closed even when fitted and easy access to the kitchen cabinets when it is open.

Why isn't it like everyone else?

The solid and stable pantograph system is composed of four levers operated by four gas pistons of 65 kg or 75 kg each (depending on the model).

The bed is longitudinal so you can get on and off without disturbing your partner.

Its use is very simple: it is manually brought into the day and night position with the simple gesture of a hand without having to operate hooks or latches and it has a capacity of 350kg.

It's ours double bed always ready, you don't have to do it and unpack every morning and evening: sleeping bags, sheets, blankets, pillows always remain in place and compress to the ceiling when the bed is in day position.

Above the bed, the accentuated radius of the monocoque creates a wide-ranging volume (you can sit without banging your head), the SkyView sunroof allows you to give the right ventilation to the whole area and the LED reading lights, facilitate a comfortable reading before sleep. It also comes standard with wooden slats and a comfortable memory-foam mattress.

Gallery

W-factors


Interni e tessuti - w-factor - camper

Interior and fabrics

Furnishings
and design

01

The interior furnishings, with an intentionally Minimal Refined design, are designed, engineered and produced directly in Wingamm.

The creation of the furniture (which guarantees comfort, elegance and internal functionality) has never been entrusted to external suppliers. The main objective in furnishing design is to maximize the use of interior spaces and to obtain a functional and comfortable environment even in very small spaces.

The minimal design, the clean lines, the extremely light colors are not just a stylistic quirk, but a very specific choice to lighten, illuminate and give volume to a really small room.

Comfort acoustic system

02

All the furniture is fixed to the walls of the monocoque with an exclusive structural sealant. This gluing system, unlike screw fixing, it eliminates frictional noises while driving and guarantees a better seal over time.  Acoustic comfort while driving is also guaranteed by the monolithic Wingamm fiberglass bodywork, without straps or other details in ABS or aluminum fixed to the outside, which can vibrate and create noises while driving.

Materials

03

The furnishings are rigorously made of first choice poplar plywood (guarantee of high quality and at the same time of low specific weight) covered with precious and resistant stratified HPL laminates Abet, Arpa or Formica in different decorations.

Materials

03

The furnishings are rigorously made of first choice poplar plywood (guarantee of high quality and at the same time of low specific weight) covered with precious and resistant stratified HPL laminates Abet, Arpa or Formica in different decorations.

Decorations

04

The Olmo Bianco, Portofino, Mercadante and Toucher decorations are always combined with white for a luminous, light and relaxing result. As an option there is also the possibility to choose the Fenix coating for a very high quality kitchen top: thermal repairability of surface micro scratches, anti-fingerprint, low light reflection and extreme opacity, softness to the touch.

Decorations

04

The Olmo Bianco, Portofino, Mercadante and Toucher decorations are always combined with white for a luminous, light and relaxing result. As an option there is also the possibility to choose the Fenix coating for a very high quality kitchen top: thermal repairability of surface micro scratches, anti-fingerprint, low light reflection and extreme opacity, softness to the touch.

Fabrics

05

The personalization of the interiors is also available in a wide choice of highly resistant and strictly Made in Italy quality fabrics combined with light-colored eco-leather, easily washable.

Fabrics

05

The personalization of the interiors is also available in a wide choice of highly resistant and strictly Made in Italy quality fabrics combined with light-colored eco-leather, easily washable.

Gallery

W-factors